FrontPanel Subsystem IP Version 1.1 (Rev. 0)
 2026-08-03
 * Corrected the DNA width in generated Synthesis and Simulation wrapper files.
 * Add SZG-HUB1450-AU10P-10G board support.
 * Minor GUI changes.

FrontPanel Subsystem IP Version 1.0 (Rev. 6)
 2024-06-14
 * Add XEM8305-AU15P-2E board support
 * Add XEM8305-AU15P-1E board support

FrontPanel Subsystem IP Version 1.0 (Rev. 5)
 2024-01-25
 * Add XEM8370-KU11P board support
 * Update the block diagram artwork for all boards.

FrontPanel Subsystem IP Version 1.0 (Rev. 4)
 2023-12-04
 * For both okClk and okClks, establish a new interface of the clock_rtl type and
   set their FREQ_HZ parameter to 100800000 Hz. This enables automatic frequency
   propagation in the IPI block designer.
 * Fixed an issue where using capital hexadecimal address values would trigger the error
   message: 'Named port connection 'xyz' does not exist.'

FrontPanel Subsystem IP Version 1.0 (Rev. 3)
 2023-08-21
 * Minor GUI changes
 * Add closing "`default_nettype wire" directive to several example
   design files that also implement "`default_nettype none" at the
   beginning of the file. This modification addresses potential errors
   encountered with our encrypted FrontPanel HDL files, such as the
   "[Synth 8-5809] Error generated from encrypted envelope" error.
 * Removed Autofill feature in FrontPanel Vivado IP Core due to Vivado IP handling
   changes that started with Vivado version 2022.2; manual endpoint address entry 
   now required.
 * Users are advised not to use prior versions of the FrontPanel Vivado IP Core
   with Vivado versions 2022.2 and onwards. This version of FrontPanel Vivado IP
   Core resolves the following issues in those Vivado versions:
     * Resolves "CRITICAL WARNING: [IP_Flow 19-5622] Failed to create IP instance."
     * Resolves "You cannot have two endpoints with the same address" error in the TCL
       console. The error occurs after pressing "OK" in the GUI, even though the GUI
       did not report these errors initially.

FrontPanel Subsystem IP Version 1.0 (Rev. 2)
 2023-03-21
 * Minor GUI changes

FrontPanel Subsystem IP Version 1.0 (Rev. 1)
 2022-10-12
 * Add XEM8350-KU115 board support
 * Add XEM7320-A200 board support
 * Resolve "[Synth 8-5809] Error generated from encrypted envelope"
   error when using a Vivado version ealier than v2021.1 by adding
   2017 key encrypted sources for all applicable boards
 * Add Vivado version compatibility restrictions for each board
 * Restrict IP Core from being used with XEM8320-AU25P board file
   v1.0 or v1.1 as these have not yet implemented the host_interface or
   host_interface_s board interfaces

FrontPanel Subsystem IP Version 1.0 (Rev. 0)
 2022-09-14
 * Initial creation
